ZENDADDY
BUY NOW

Cronus Zen Fortnite
Setup Guide 2026

Complete step-by-step tutorial to install GOD FLICK v3.0 PRO on your Cronus Zen device. Takes only 3 minutes.

Setup Time: 3 Minutes | Works on PS4/PS5/Xbox | 29 OLED Settings

What You Need

Hardware

  • Cronus Zen device (required)
  • PlayStation 4/5 or Xbox console
  • PS4/PS5 or Xbox controller
  • USB cable for Cronus Zen
  • Windows PC (for initial setup only)

Software

  • Zen Studio (free download)
  • ZenDaddy GOD FLICK v3.0 PRO (.gpc file)
  • Latest Cronus Zen firmware
  • Fortnite (latest season)

Step-by-Step Installation

1

Purchase GOD FLICK v3.0 PRO

Click the button below to purchase ZenDaddy. You'll receive instant access to download the .gpc script file and instructions.

Get GOD FLICK v3.0 PRO
2

Download Zen Studio

If you haven't already, download Zen Studio from the official Cronus website:

  • Go to cronusmax.com
  • Navigate to Downloads - Zen Studio
  • Install the software on your Windows PC
  • Make sure you have the latest firmware installed
3

Load ZenDaddy Script

Now let's load the GOD FLICK v3.0 PRO .gpc file onto your Cronus Zen:

  1. 1. Connect your Cronus Zen to PC via USB (PROG port)
  2. 2. Open Zen Studio software
  3. 3. Click "Programmer" tab at the top
  4. 4. Drag and drop the ZENDADDY_GODFLICK_v3.0_PRO.gpc into the compiler
  5. 5. Click "Program Device" button
  6. 6. Wait for "Programming Complete" message

Tip: If it fails, make sure firmware is updated and Zen is in programming mode (blue light).

4

Connect to Console

Time to connect everything to your console:

  • Disconnect Zen from PC
  • Connect controller to Zen A1 port
  • Connect Zen to console via CONSOLE port
  • Wait for Zen to show connection status
  • PS: Purple light / Xbox: Green light = connected
5

Play Fortnite!

Launch Fortnite and start playing:

  • Start Fortnite on your console
  • Script is active by default (green LED)
  • Toggle: R1 + D-pad UP = ON / R1 + D-pad DOWN = OFF
  • Open OLED menu: Hold L2 + press OPTIONS

GOD FLICK v3.0 PRO comes with optimized defaults. Use the OLED menu to fine-tune 29 settings across 7 pages! Read the full documentation for detailed setting explanations.

OLED Menu Controls

Navigation

  • L2 + OPTIONS = Open/Close Menu
  • L1 / R1 = Switch Pages (7 pages)
  • D-pad UP/DOWN = Select Setting
  • D-pad LEFT/RIGHT = Adjust Value
  • SQUARE = Toggle ADS/HIP mode
  • R1 + L1 = Reset All Defaults

Menu Pages

  • L STICK - Pattern, Speed, Size (ADS/HIP)
  • R STICK - Pattern, Speed, Size (ADS/HIP)
  • DAMP - ADS, Hip, Turn, Pre-Aim
  • SYSTEM - Deadzone, R-DZ, Tapfire
  • BOOST - Track, Stick, L-Rnd, R-Rnd
  • MODS - ADS Pulse, Crouch Spam
  • EXTRA - Headshot Bias, Anti-Bloom

Common Issues

Script not loading / Zen shows error

Make sure Cronus Zen firmware is updated. Disconnect all cables, restart Zen, then try programming again in Zen Studio.

Settings show all zeros

This happens when PVars from a previous script are stored on the device. Simply open the OLED menu (L2 + OPTIONS) and press R1 + L1 to reset to defaults. The v3.0 PRO auto-detects corrupted values and resets on first boot.

Controller disconnects

Use A1 port only for controller. Make sure USB cables are secure. Some wireless controllers need USB connection to Zen.

Script stops working mid-game

Toggle it back on with R1 + D-pad UP. If it persists, reprogram the device or check for firmware updates.

Need hands-on help? Get live 1-on-1 setup support:

Join Discord (Free)

Ready to Get Started?

Setup takes 3 minutes. Start dominating Fortnite today.

Get GOD FLICK v3.0 PRO

Instant Download | 29 OLED Settings | Discord Support